Bell Crank Bushings

dkarnath Posted 2018-08-13 11:22 AM (#5757) Subject: Bell Crank Bushings Elite Veteran Location: Medford, OR Hey Lou, Is this a special/specific size bushing driver in your pic? Or just a random piece of steel? I'm about to do this job and was curious if I will be able to pop the new bushings in/out without the use of any special tool. Thanks http://www.fmcowners.com/mbbs22/photos/show-album.asp?albumid=148&p... hemi354az Posted 2018-08-13 1:15 PM (#5758 - in reply to #5757) Subject: Re: Bell Crank Bushings Extreme Veteran Location: Scottsdale, Aridzona Hey Dan, I've got a 14 X 30 Taiwan lathe and a Bridgeport Mill . . . so turned some steel bar stock . . . filed to fit . . . and paint to match. Hard to get a good "step" shoulder on a round "driver" without a lathe. I'll provide dimensions . . . if you have a friend or a shop that can whittle them for you from a good piece of steel . . . no regurgitated rebar. Drive OUT ! Lou #120 hemi354az Posted 2018-08-13 1:32 PM (#5759 - in reply to #5758) Subject: Re: Bell Crank Bushings Extreme Veteran Location: Scottsdale, Aridzona . . . and please see - http://www.fmcowners.com/mbbs22/forums/thread-view.asp?tid=781&post... and my Message #4034 about using the "tools" in the pictures in the link above. Lou #120