 | |
Location: Canton, (Sixes) GA
(24.98.223.107) | I am in the process of replacing the vanity cabinet 9270 plunger switch and would like to find led or even lower wattage incandescent light bulbs. It has eight 25 watt 1143KF E17 intermediate Edison screw single contact base bulbs. Don’t need 200 watts (8BX25W=200W). Yeah, I know I can leave several unscrewed but looking for an alternative. Haven’t had much luck on finding anything suitable. Anyone else reinvented this wheel?
Edited by denshew 2012-08-02 12:17 PM
| |
|
| |
(50.131.138.222) | I took the original U shaped holder, removed the screw in bulbs and fixtures, and cut out 1 1/4" by 5" top and bottom of each side. Backed it up with plexiglas lens and LED lights.
Came out awesome. | |
|
| |
Location: Cottage Grove, OR
(76.14.169.83) | Paul Hankerson - 2012-10-17 9:02 PM I took the original U shaped holder, removed the screw in bulbs and fixtures, and cut out 1 1/4" by 5" top and bottom of each side. Backed it up with plexiglas lens and LED lights. Came out awesome. Now that sounds very interesting. When can we actually see it? Coming to the rally? | |
|
| |
(50.131.138.222) | Hope to make it to the rally. If not I can send you some pictures.
Paul | |
|
|