Windshield Gasket

Jrobowen62 Posted 2017-11-02 7:05 AM (#5134) Subject: Windshield Gasket Contributor Location: Shoreview, MN Thanks to a lead from Stephen H., former FMC owner Lenny Mach identified the correct gasket for windshield replacement. Manuf.: C.R. Laurence Material: EPDM Gasket P/N: AS1488 Locking strip P/N: AS937 Qty: 25' needed of each, comes in a 50' roll The gasket is good for glass and fiberglass thicknesses of 3/16 - 1/4, so watch the fiberglass thickness as it may exceed that in spots (per Lenny it might require local grinding). http://www.crlaurence.com/crlapps/showline/offerpage.aspx?Productid... Thanks again for the lead Stephen! I have not installed it but I wanted to share the intell. It is getting cold here in MN, so I might hold off a bit. . LCAC_Man Posted 2017-11-03 9:45 AM (#5139 - in reply to #5134) Subject: Re: Windshield Gasket Elite Veteran Location: Oceanside, CA Great info...thanks for chasing it down and publicizing it! BigRabbitMan Posted 2017-11-06 3:55 PM (#5146 - in reply to #5134) Subject: Re: Windshield Gasket Expert Location: Cottage Grove, OR Yes, thanks for coming back and posting the info. We have been looking for those numbers for a long time.