Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum ->  General Discussion -> Mechanic's Corner -> View Thread

You are logged in as a guest. ( logon | register )

10-hole 19.5" Alcoas?
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General Discussion -> Mechanic's CornerMessage format
 
andy1canada
Posted 2021-09-30 9:16 AM (#7883)
Subject: 10-hole 19.5" Alcoas?


Elite Veteran

500100100
Location: Victoria, BC. Canada
Can't say I've seen these before.

Check out the last pic in the series here:

https://seattle.craigslist.org/skc/cto/d/seattle-1973-fmc-motorhome-...

Anyone who knows what they are (part #) please share it.

I emailed the seller to try to get more info.

Perhaps another option for Alcoa's that I (we) weren't aware of?

Terry
#846
Top of the page Bottom of the page
hemi354az
Posted 2021-09-30 12:17 PM (#7884 - in reply to #7883)
Subject: Re: 10-hole 19.5" Alcoas?


Extreme Veteran

50025
Location: Scottsdale, Aridzona
http://www.fmcowners.com/mbbs22/photos/photo-thumbnails.asp?albumid...
Top of the page Bottom of the page
LCAC_Man
Posted 2021-10-03 3:56 PM (#7885 - in reply to #7884)
Subject: Re: 10-hole 19.5" Alcoas?


Elite Veteran

5001001001002525
Location: Oceanside, CA
If you can find those 10 on 7.25 wheels for a good price it's definitely and option...or just have these done the way you want to start with: https://alu-wheels.com/A196009-BBM19point5inchx6inch_NO_PCD_BLANK
Top of the page Bottom of the page
dkarnath
Posted 2021-10-04 11:08 AM (#7886 - in reply to #7883)
Subject: Re: 10-hole 19.5" Alcoas?


Elite Veteran

5001002525
Location: Medford, OR
That's my old FMC #850, it's a 1975, get the year right for that money....
Top of the page Bottom of the page
dkarnath
Posted 2021-10-04 11:14 AM (#7887 - in reply to #7886)
Subject: Re: 10-hole 19.5" Alcoas?


Elite Veteran

5001002525
Location: Medford, OR
http://www.fmcowners.com/mbbs22/photos/photo-thumbnails.asp?albumid...
Top of the page Bottom of the page
andy1canada
Posted 2021-10-05 3:24 PM (#7888 - in reply to #7886)
Subject: Re: 10-hole 19.5" Alcoas?


Elite Veteran

500100100
Location: Victoria, BC. Canada
Sorry Dan-O!

My bad. Should have recognized the old girl right away. Especially with those low seat backs because I distinctly remember our discussion about raising them up some.

Terry
#846
Top of the page Bottom of the page
hal
Posted 2021-10-05 8:15 PM (#7889 - in reply to #7885)
Subject: Re: 10-hole 19.5" Alcoas?


Regular

252525
Who and where could you find to machine the wheels Len? Looks a lot better than spending nearly $600 for a well used wheel. I don't have the equiptment or ability to do this myself.
Thanks, Hal
Top of the page Bottom of the page
LCAC_Man
Posted 2021-10-06 9:08 AM (#7891 - in reply to #7889)
Subject: Re: 10-hole 19.5" Alcoas?


Elite Veteran

5001001001002525
Location: Oceanside, CA
Hal,
The same company that sells them will put any pattern on them you want. I think when I asked them it was $100 a wheel to custom machine, but, that's been a couple years back when I was looking at 22.5" blanks with the 5 lug pattern..
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Go to FMCowners.com HomeRunning MegaBBS ASP Forum Software
© 2002-2024 PD9 Software
(Delete all cookies set by this site)