|
|
Contributor
Location: Shoreview, MN | Thanks to a lead from Stephen H., former FMC owner Lenny Mach identified the correct gasket for windshield replacement.
Manuf.: C.R. Laurence
Material: EPDM
Gasket P/N: AS1488
Locking strip P/N: AS937
Qty: 25' needed of each, comes in a 50' roll
The gasket is good for glass and fiberglass thicknesses of 3/16 - 1/4, so watch the fiberglass thickness as it may exceed that in spots (per Lenny it might require local grinding).
http://www.crlaurence.com/crlapps/showline/offerpage.aspx?Productid...
Thanks again for the lead Stephen! I have not installed it but I wanted to share the intell. It is getting cold here in MN, so I might hold off a bit. . |
|
|
|
Elite Veteran
Location: Oceanside, CA | Great info...thanks for chasing it down and publicizing it!
|
|
|
|
Expert
Location: Cottage Grove, OR | Yes, thanks for coming back and posting the info. We have been looking for those numbers for a long time. |
|
|