Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum ->  General Discussion -> Mechanic's Corner -> View Thread

You are logged in as a guest. ( logon | register )

Brake Hose Part Numbers ??
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General Discussion -> Mechanic's CornerMessage format
 
ricogomez
Posted 2018-03-07 1:29 PM (#5362)
Subject: Brake Hose Part Numbers ??


Veteran

100252525
Location: Houston, Texas
Thinking about changing the brake rubber hoses on all 4 corners
and maybe connecting them on the lower wheel cylinders, anybody has
some part numbers for them ? suggestions ?? opinions ??? or ???

Flushing the entire system and trying to get all the air out with a pressure bleeder
and was thinking about changing the hoses, they look like they maybe the original ones,
bleeder works great on the small master cylinder..


https://www.speedibleed.com/products/brake-bleeding-kit-diy/k300b-do...




Rico & Carmen
397
Top of the page Bottom of the page
LCAC_Man
Posted 2018-03-07 4:12 PM (#5368 - in reply to #5362)
Subject: Re: Brake Hose Part Numbers ??


Elite Veteran

5001001001002525
Location: Oceanside, CA
http://www.fmcowners.com/mbbs22/photos/photo-thumbnails.asp?albumid...
and
http://www.fmcowners.com/mbbs22/forums/thread-view.asp?tid=797&post...

Edited by LCAC_Man 2018-03-07 4:16 PM
Top of the page Bottom of the page
ricogomez
Posted 2018-03-20 9:56 AM (#5420 - in reply to #5368)
Subject: Re: Brake Hose Part Numbers ??


Veteran

100252525
Location: Houston, Texas
is there any part numbers for these hoses or did you just order them custom made ?
I'm getting ready for these hoses and would like to order them or get them made
here in Houston ?? (if I'm lucky)

Thanks
Top of the page Bottom of the page
ricogomez
Posted 2018-03-26 11:21 AM (#5437 - in reply to #5362)
Subject: RE: Brake Hose Part Numbers ??


Veteran

100252525
Location: Houston, Texas
found these hoses part number, I think these will fit front or back ????

Brake Hydraulic Hose Dorman H31669 fits 60-66 Ford F-250



the local part store order 2 for me, they look the same as the two
old front hoses I removed from the front....

Rico
Top of the page Bottom of the page
LCAC_Man
Posted 2018-03-27 1:23 PM (#5442 - in reply to #5437)
Subject: Re: Brake Hose Part Numbers ??


Elite Veteran

5001001001002525
Location: Oceanside, CA
At over 24" they will be really long for the front, they may (depending on how/where your rear brake hard-lines are plumbed) be good for the rear if you plan to use the lower cylinder connection...my rears were 26" so it will be close..
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Go to FMCowners.com HomeRunning MegaBBS ASP Forum Software
© 2002-2024 PD9 Software
(Delete all cookies set by this site)