Location: Ignacio Colorado
(99.195.99.149) | This is a test, a test of the emergency broadcast network. I/we need someone to (help) build a controller to convert a speed sensor signal into a pulse width ground signal (approx 0-1 amp 14v) to control a pressure solenoid in the valve body on an overdrive transmission. I have found talk of this on mopar tech sites but as far as I can find, no body has done it yet.
If you know more about electrons than gasoline we might be able to make a little (FMC) magic. If you understand this please contact me.
To answer some of the questions before hand This is what is needed to control the shifting of the chysler 46RE overdrive transmission. We have figured out how to fit the 46RH unit but the 46RE is shorter and would require less modification to fit in the FMC.
Bill Sitton |
overdrive trans controller
