Elite Veteran
 
Location: Victoria, BC. Canada | I thought I'd get away with not using bead-rolled 3" pipe ends on some my charge-air piping.
NOT!
Bead-roller machines ain't cheap and start around $200 for the junkie ones.
Watched a few Youtube videos and focused on vicegrips.
Hal had pointed out that Lenny had included pics of his DIY vicegrips unit in his build thread (which I hadn't seen) but I had already came home with the parts to build it, which strangely enough were exactly the same as what he'd used.
This is pretty much the same as what Lenny used.
http://www.fmcowners.com/mbbs22/photos/photo-thumbnails.asp?msg=upd...
Works like a hot-damn!
Terry
#846
Edited by andy1canada 2023-11-02 9:12 PM
|
DIESEL INTERCOOLER PIPE DIY - BEAD ROLLER WITH VICEGRIPS.
