Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum ->  General Discussion -> Mechanic's Corner -> View Thread

You are logged in as a guest. ( logon | register )

Gas Cap part number ?
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General Discussion -> Mechanic's CornerMessage format
 
ricogomez
Posted 2014-02-11 4:05 PM (#2113)
Subject: Gas Cap part number ?


Veteran

100252525
Location: Houston, Texas
Help we need a Gas Cap for our FMC, does anybody
have a part number ?

Rico
Top of the page Bottom of the page
BigRabbitMan
Posted 2014-02-13 5:09 PM (#2114 - in reply to #2113)
Subject: RE: Gas Cap part number ?



Expert

1000100100
Location: Cottage Grove, OR

ricogomez - 2014-02-11 2:05 PM Help we need a Gas Cap for our FMC, does anybody have a part number ? Rico
I checked and your coach is #397 which makes it a 1974.  I believe your coach used a vented cap.  At some point, as smog stuff was added they had vapor recovery canisters added to a tank vent and from that point on they used a non-vented cap.  If yours does not have the canisters on top of the frame rail between the aux. generator and the engine, then you need a vented cap.

I do not have a part number, but you can measure the diameter of the fuel fill spout and then go down to Napa or other parts store and they will have a cap that fits of the correct type.

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Go to FMCowners.com HomeRunning MegaBBS ASP Forum Software
© 2002-2026 PD9 Software
(Delete all cookies set by this site)