Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum ->  General Discussion -> Discussion -> View Thread

You are logged in as a guest. ( logon | register )

Wheel Cylinder Wheel Kits & Ball Joint Boots
View previous thread :: View next thread
   General Discussion -> DiscussionMessage format
 
Faerbairn
Posted 2021-10-11 1:34 PM (#7900)
Subject: Wheel Cylinder Wheel Kits & Ball Joint Boots


Location: Benicia, CA
(67.164.8.225)		1976 FMC # 0719

Does anyone know the part number & supplier for

Wheel Cylinder Seal Kits

Ball Joint Boots

Thank you for your help.

Adam



Top of the page Bottom of the page
andy1canada
Posted 2021-10-11 5:43 PM (#7901 - in reply to #7900)
Subject: Re: Wheel Cylinder Wheel Kits & Ball Joint Boots


Location: Victoria, BC. Canada
(172.218.221.116)		Welcome Adam!

If time is of the essence, hit the 'Search' button on the top left of this page and go from there.

Both of these topics have been thoroughly hammered on here. I think the wheel cylinders (or rebuild kits if you have a honing tool) can still be found but not so sure about the ball joints. Others will likely know more here.

BTW: You may want to double check the accuracy of either your coach model yr of registration, or, the last few digits of your coach serial number as something seems amiss. I own coach #846 and its a 75'.

Just sayin'.

Again, welcome!

Terry
#846
Top of the page Bottom of the page
andy1canada
Posted 2021-10-11 8:12 PM (#7902 - in reply to #7900)
Subject: Re: Wheel Cylinder Wheel Kits & Ball Joint Boots


Location: Victoria, BC. Canada
(172.218.221.116)		Coach database shows it was once listed as a 75' which works with the production serial number.
Just sayin'.

http://www.fmcowners.com/mbbs22/coach.asp?

Terry
#846
Top of the page Bottom of the page
ricogomez
Posted 2021-10-18 8:39 AM (#7912 - in reply to #7900)
Subject: RE: Wheel Cylinder Wheel Kits & Ball Joint Boots


Location: Houston, Texas
(71.150.110.30)		Hello Adam, I have a whole new set of wheel cylinders that I can let you have for the
price of the rebuilding kit ?

Thank
Rico & Carmen
Top of the page Bottom of the page
hal
Posted 2021-10-19 1:13 PM (#7917 - in reply to #7912)
Subject: RE: Wheel Cylinder Wheel Kits & Ball Joint Boots



(174.28.188.240)		I'd love to buy the cylinders from you if you still have them available.
Top of the page Bottom of the page
andy1canada
Posted 2021-10-18 9:53 AM (#7913 - in reply to #7900)
Subject: Re: Wheel Cylinder Wheel Kits & Ball Joint Boots


Location: Victoria, BC. Canada
(172.218.221.116)		Muy poco dineros mis Amigo!

Hell of a deal.

Terry
#846
Top of the page Bottom of the page
ricogomez
Posted 2021-10-19 2:13 PM (#7918 - in reply to #7900)
Subject: RE: Wheel Cylinder Wheel Kits & Ball Joint Boots


Location: Houston, Texas
(107.77.80.111)		Hey Hal, you are the first one asking for them first,
so you are the buyer….

Pm: ricosgomez21@gmail.com

Rico & Carmen
Top of the page Bottom of the page
hal
Posted 2021-10-19 2:26 PM (#7919 - in reply to #7918)
Subject: RE: Wheel Cylinder Wheel Kits & Ball Joint Boots



(174.28.188.240)		Email sent.
Top of the page Bottom of the page
borrmann
Posted 2021-11-02 4:18 PM (#7947 - in reply to #7900)
Subject: Re: Wheel Cylinder Wheel Kits & Ball Joint Boots


Location: Bluevale, Ontario
(216.46.157.29)		If you anyone wants ball joints, Rare Parts part #10450. 1959 Cadillac rear wheel drive.
Top of the page Bottom of the page
borrmann
Posted 2021-11-02 4:33 PM (#7948 - in reply to #7900)
Subject: Re: Wheel Cylinder Wheel Kits & Ball Joint Boots


Location: Bluevale, Ontario
(216.46.157.29)		For ball joint boot you could try a Dorman 13564, tie rod boot for 3/4" shaft. Might be too small, they do have others.
Top of the page Bottom of the page
borrmann
Posted 2021-11-03 11:27 AM (#7949 - in reply to #7900)
Subject: Re: Wheel Cylinder Wheel Kits & Ball Joint Boots


Location: Bluevale, Ontario
(216.46.157.95)		Sorry, I made a mistake on the ball joint. the number I gave was for the upper joint on the Cadillac. The one that fits our FMC's is a 10107.
Top of the page Bottom of the page
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Go to FMCowners.com HomeRunning MegaBBS ASP Forum Software
© 2002-2024 PD9 Software		(Delete all cookies set by this site)