Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum ->  General Discussion -> Mechanic's Corner -> View Thread

You are logged in as a guest. ( logon | register )

Alcoa lug nut taper
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General Discussion -> Mechanic's CornerMessage format
Posted 2021-11-01 10:49 PM (#7945)
Subject: Alcoa lug nut taper


Got one of the wheels suggested here complete with the machine work I ordered. I had asked for the 5 holes to be machined for Budd nuts but they came with only a slight taper that certainly won't work. Does anyone know what the taper SHOULD be for these wheels' lug nuts? I have Alcoa's so need to match their taper. I may need to contact Alcoa and try to find that information but it's difficult to pin many of these people down.
Thanks for any ideas, Hal
Top of the page Bottom of the page
Posted 2021-11-02 7:27 AM (#7946 - in reply to #7945)
Subject: Re: Alcoa lug nut taper

Elite Veteran

Location: Victoria, BC. Canada
That's proprietary information Hal. If they told you they'd have to kill you.

Apparently I don't know either...

Good luck.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Go to HomeRunning MegaBBS ASP Forum Software
© 2002-2022 PD9 Software
(Delete all cookies set by this site)