Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum ->  General Discussion -> Discussion -> View Thread

You are logged in as a guest. ( logon | register )

Vanity Cabinet Light Bulbs
View previous thread :: View next thread
   General Discussion -> DiscussionMessage format
 
denshew
Posted 2012-08-02 12:16 PM (#1649)
Subject: Vanity Cabinet Light Bulbs


Location: Canton, (Sixes) GA
(24.98.223.107)		I am in the process of replacing the vanity cabinet 9270 plunger switch and would like to find led or even lower wattage incandescent light bulbs.  It has eight 25 watt 1143KF E17 intermediate Edison screw single contact base bulbs. Don’t need 200 watts (8BX25W=200W).  Yeah, I know I can leave several unscrewed but looking for an alternative. Haven’t had much luck on finding anything suitable. Anyone else reinvented this wheel?

Edited by denshew 2012-08-02 12:17 PM
Top of the page Bottom of the page
denshew
Posted 2012-08-03 3:17 PM (#1650 - in reply to #1649)
Subject: Re: Vanity Cabinet Light Bulbs


Location: Canton, (Sixes) GA
(24.98.223.107)		Found the solution - http://www.sailorsams.com/Switchmode-Dimmer-12-24VDC-200-400W_p_456...
Top of the page Bottom of the page
BigRabbitMan
Posted 2012-08-03 11:05 PM (#1651 - in reply to #1650)
Subject: Re: Vanity Cabinet Light Bulbs



Location: Cottage Grove, OR
(216.139.18.80)		Looks interesting.
Top of the page Bottom of the page
Paul Hankerson
Posted 2012-10-17 11:02 PM (#1700 - in reply to #1649)
Subject: RE: Vanity Cabinet Light Bulbs



(50.131.138.222)		I took the original U shaped holder, removed the screw in bulbs and fixtures, and cut out 1 1/4" by 5" top and bottom of each side. Backed it up with plexiglas lens and LED lights.
Came out awesome.
Top of the page Bottom of the page
BigRabbitMan
Posted 2012-10-17 11:10 PM (#1701 - in reply to #1700)
Subject: RE: Vanity Cabinet Light Bulbs



Location: Cottage Grove, OR
(76.14.169.83)
Paul Hankerson - 2012-10-17 9:02 PM I took the original U shaped holder, removed the screw in bulbs and fixtures, and cut out 1 1/4" by 5" top and bottom of each side. Backed it up with plexiglas lens and LED lights. Came out awesome.
  Now that sounds very interesting.  When can we actually see it?  Coming to the rally?
Top of the page Bottom of the page
Paul Hankerson
Posted 2012-10-22 12:16 AM (#1702 - in reply to #1649)
Subject: Re: Vanity Cabinet Light Bulbs



(50.131.138.222)		Hope to make it to the rally. If not I can send you some pictures.

Paul
Top of the page Bottom of the page
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Go to FMCowners.com HomeRunning MegaBBS ASP Forum Software
© 2002-2025 PD9 Software		(Delete all cookies set by this site)