Location: Scottsdale, Aridzona
(68.110.65.14) | Number of grooves ?
Pulley outside (max) diameter ?
Pulley height ? (measured laying on flat surface on big diameter down, measure "height" from flat surface to top of pulley where the pilot hole is)
Pilot hole ? (small - 5/8", medium - 3/4", large - 1-1/8" Measure the pilot on YOUR pump.
Look on E-bay with "Chrysler pulley" as Search entry. There are lots and lots, rarely with Part Numbers, of all kinds of diameters, # of grooves, height, and pilot hole size. You may want to ask seller about actual dimensions of what is there after you determine what you want. Reminder, the crank pulley has six bolt holes, where the water pump pulley has only four. You will get more to pick from with just the Chrysler (could also use Mopar) than if you get too restrictive with the Search. Just skip past the crank pulleys.
Good hunting, Lou #120 |
Fan Pulley new / used
