|
|
Contributor
Location: Prescott, AZ | Can anyone provide me with wheel cylinder part # for front and rear brakes? Napa or Raybestos. Also rebuild kit if available as I might choose that option depending on expense. Using DOT5.
8 wheel cylinders!  |
|
| |
|
Elite Veteran
 
Location: Victoria, BC. Canada | Howdy,
There's quite a few places out there to get this stuff.
Again, any of us doing brake-work on these old beasts owe a debt of gratitude to the likes of Randy Bradshaw, Lou & El-Presidente' Billy for
all the great work and knowledge they've shared.
H-vacs are getting tougher to get though; my research tells me Cardone (#518000) are the only guys making them
and O'Rielys (Brakebest #2508827) I think are also Cardone units with different numbers. Don't believe rebuild kits are
available for the H-vacs any more. Lou could prove me wrong here. The H-vacs are $135.00 - $143.00 @ O'Rielys plus shipping to the store nearest you.
Wheel Cylinder Kit: Raybestos WK-195 or Napa #195
Wheel Cylinders: Raybestos WC-28851 or O'Rielys Brakebest WC37151
Cheapest I've seen them: http://www.amazon.com/Raybestos-WC28851-Professional-Grade-Cylinder...
Good luck!
Terry
#846 |
|
| |
|
Contributor
Location: Prescott, AZ | Hi Terry,
I think I will opt for the new units as they are not that pricey. I think my boosters are fine. Jury is still out on the MC.
Thanks for your quick and courteous response!
Vincente |
|
| |
Wheel cylinder part #
