Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum -> Albums -> View Album

You are logged in as a guest. ( logon | register )

LCAC_Man #1027 LBZ Duramax Conversion
Author: LCAC_Man (Show all albums)

This album will cover the Duramax/Allison conversion(including dash cluster integration), installation of airbags to assist suspension, conversion of vacuum brakes to Hydroboost, replacement of Onan gas generator with a Onan/Cummins 5500LP, inverter/charger installation, dual roof a/c installation, and Bedroom reconfiguration that will add "pass-thru" storage.
Show Newest Photos First | Show Oldest Photos First461 Photos - Page : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39]


(4 Comments)
Flex coupler is well clear of everything and will make mounting of the rest of the system much easier


the modified downpipe exits in a much better position, I'll only need a 90dg bend to turn rear and make the muffler attachment


magnaflow downpipe modified with flex coupler, I cut the bottom bend off of it and reinstalled the flange that was there (to ease welding to the flex coupler)


capped the opening with some scrap 1/8" steel, much better than spending $140 for an LB7 up-pipe


I'm eliminating the egr system completely so instead of buying an LB7 up-pipe I just cut off the upper section that used to go to the egr cooler


had 1/4" rings waterjet cut, larger one tapped for 1/4-20 hardware and welded to the tank, smaller ring retains the piece of the donor tank with the flange down tight


modified the stock fuel tank to accept the donor truck fuel tank pickup


welded the anchor nuts in the frame (both sides ) for the new dedicated radiator supports


finished fabrication on the fan shroud and converted it to a split design so that I can remove it while leaving the radiator in place


modified some the stock intake parts for a better transition piece


New magnaflow 3" turbo downpipe, will probably cut the bottom few inches off this and add a flex coupler so that I can rigid mount the rest of the exhaust


Fuel pickup from the donor modified to the depth (20") of the FMC tank.
Show Newest Photos First | Show Oldest Photos First461 Photos - Page : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39]

Return to viewing all photo albums



Go to FMCowners.com HomeRunning MegaBBS ASP Forum Software
© 2002-2019 PD9 Software
(Delete all cookies set by this site)